2026 remote: tabbed Nextion UI, robot telemetry, servo centre calibration
Protocol v4: CmdPacket grows to 26 bytes (cal_cmd, cal_servo, cal_value); new 30-byte Telemetry rides back on the nRF24 ack payload (robot state, IMU, battery, 18 joint angles, packets/s, servo-cal echo). Each end drops wrong-length packets, so version mismatches still fail closed. Robot (owner-approved): SERVO_CAL state while disarmed, per-servo centre trims (+-200 us) in EEPROM, telemetry, battery reading; the IMU estimate now always runs (leveling still gated by ROBOT GYRO). Remote: generated HMI (scripts/make_remote_hmi.py) with pages splash, drive, status, servos, cal, setup, upload; page-aware NextionUI that only writes the showing page and only what changed; servo calibration and UPDATE DISPLAY on the touchscreen and serial console; battery module. The display is on Serial2 (pins 7/8), found on the real remote; the old sketch's Serial1 was never connected to it. Sim: RF24 shim supports ack payloads, API version 8 (hxsim_get_ack_payload); sim_smoke checks telemetry and every CAL command. Unity CmdPacket mirror updated. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
1 parent
481610c9fd
commit
0b836af8de
40 files changed
+1463
-281
No files matched your search
@@ -18,7 +18,7 @@
|
||||
#endif
|
||||
|
||||
// Bump whenever a signature or struct below changes; the C# side checks it.
|
||||
#define HXSIM_API_VERSION 7
|
||||
#define HXSIM_API_VERSION 8
|
||||
|
||||
#define HXSIM_NUM_LEGS 6
|
||||
|
||||
@@ -83,6 +83,10 @@ HXSIM_API void hxsim_get_servos(int32_t* us_18, int32_t* attached_18, uint32_
|
||||
HXSIM_API void hxsim_get_joints_deg(float* deg_18); // servo pulses decoded through Config.h's per-servo SERVOS table
|
||||
HXSIM_API void hxsim_get_feet_mm(float* xyz_18); // forward kinematics of those angles, body frame
|
||||
HXSIM_API void hxsim_get_status(HxStatus* out);
|
||||
// The robot's telemetry (shared/HexapodProtocol Telemetry) as it came back in
|
||||
// the ack payload of the last packet received. Returns its length in bytes
|
||||
// (sizeof(Telemetry)), 0 before the first one.
|
||||
HXSIM_API int32_t hxsim_get_ack_payload(uint8_t* out, int32_t cap);
|
||||
// Kinematic body (SimBody.cpp): the body rests on the support plane of its
|
||||
// feet and grounded feet don't slide. World frame = robot frame at power-on,
|
||||
// ground at z = 0. Any pointer may be null.
|
||||
|
||||
Reference in new issue
Block a user