2026 remote: tabbed Nextion UI, robot telemetry, servo centre calibration
Protocol v4: CmdPacket grows to 26 bytes (cal_cmd, cal_servo, cal_value); new 30-byte Telemetry rides back on the nRF24 ack payload (robot state, IMU, battery, 18 joint angles, packets/s, servo-cal echo). Each end drops wrong-length packets, so version mismatches still fail closed. Robot (owner-approved): SERVO_CAL state while disarmed, per-servo centre trims (+-200 us) in EEPROM, telemetry, battery reading; the IMU estimate now always runs (leveling still gated by ROBOT GYRO). Remote: generated HMI (scripts/make_remote_hmi.py) with pages splash, drive, status, servos, cal, setup, upload; page-aware NextionUI that only writes the showing page and only what changed; servo calibration and UPDATE DISPLAY on the touchscreen and serial console; battery module. The display is on Serial2 (pins 7/8), found on the real remote; the old sketch's Serial1 was never connected to it. Sim: RF24 shim supports ack payloads, API version 8 (hxsim_get_ack_payload); sim_smoke checks telemetry and every CAL command. Unity CmdPacket mirror updated. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
1 parent
481610c9fd
commit
0b836af8de
40 files changed
+1463
-281
No files matched your search
@@ -83,6 +83,7 @@ HXSIM_API void hxsim_step(uint32_t dt_us) {
|
||||
}
|
||||
|
||||
HXSIM_API void hxsim_radio_send(const uint8_t* bytes, int32_t len) { simhw::radioSend(bytes, len); }
|
||||
HXSIM_API int32_t hxsim_get_ack_payload(uint8_t* out, int32_t cap) { return simhw::radioLastAckPayload(out, cap); }
|
||||
|
||||
HXSIM_API void hxsim_set_imu(float ax, float ay, float az, float gx, float gy, float gz) {
|
||||
g_manual_imu = true;
|
||||
|
||||
Reference in new issue
Block a user