2026 remote: tabbed Nextion UI, robot telemetry, servo centre calibration
Protocol v4: CmdPacket grows to 26 bytes (cal_cmd, cal_servo, cal_value); new 30-byte Telemetry rides back on the nRF24 ack payload (robot state, IMU, battery, 18 joint angles, packets/s, servo-cal echo). Each end drops wrong-length packets, so version mismatches still fail closed. Robot (owner-approved): SERVO_CAL state while disarmed, per-servo centre trims (+-200 us) in EEPROM, telemetry, battery reading; the IMU estimate now always runs (leveling still gated by ROBOT GYRO). Remote: generated HMI (scripts/make_remote_hmi.py) with pages splash, drive, status, servos, cal, setup, upload; page-aware NextionUI that only writes the showing page and only what changed; servo calibration and UPDATE DISPLAY on the touchscreen and serial console; battery module. The display is on Serial2 (pins 7/8), found on the real remote; the old sketch's Serial1 was never connected to it. Sim: RF24 shim supports ack payloads, API version 8 (hxsim_get_ack_payload); sim_smoke checks telemetry and every CAL command. Unity CmdPacket mirror updated. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
1 parent
481610c9fd
commit
0b836af8de
40 files changed
+1463
-281
No files matched your search
@@ -12,9 +12,20 @@ public:
|
||||
// Lets the serial test harness (or, later, real radio) inject a packet directly.
|
||||
void injectPacket(const CmdPacket& p) { packet_ = p; last_rx_ms_ = millis(); }
|
||||
|
||||
// Telemetry for the remote. Goes out as the ack payload of the next packet
|
||||
// received, so set it every loop.
|
||||
void setTelemetry(const Telemetry& t) { telemetry_ = t; }
|
||||
uint8_t packetsPerSec() const { return rx_per_sec_; }
|
||||
|
||||
private:
|
||||
CmdPacket packet_;
|
||||
uint32_t last_rx_ms_ = 0;
|
||||
bool link_ok_ = false;
|
||||
bool radio_present_ = false;
|
||||
Telemetry telemetry_;
|
||||
uint16_t rx_count_ = 0;
|
||||
uint8_t rx_per_sec_ = 0;
|
||||
uint32_t rate_window_ms_ = 0;
|
||||
|
||||
void loadAckPayload();
|
||||
};
|
||||
Reference in new issue
Block a user