2026 remote: tabbed Nextion UI, robot telemetry, servo centre calibration
Protocol v4: CmdPacket grows to 26 bytes (cal_cmd, cal_servo, cal_value); new 30-byte Telemetry rides back on the nRF24 ack payload (robot state, IMU, battery, 18 joint angles, packets/s, servo-cal echo). Each end drops wrong-length packets, so version mismatches still fail closed. Robot (owner-approved): SERVO_CAL state while disarmed, per-servo centre trims (+-200 us) in EEPROM, telemetry, battery reading; the IMU estimate now always runs (leveling still gated by ROBOT GYRO). Remote: generated HMI (scripts/make_remote_hmi.py) with pages splash, drive, status, servos, cal, setup, upload; page-aware NextionUI that only writes the showing page and only what changed; servo calibration and UPDATE DISPLAY on the touchscreen and serial console; battery module. The display is on Serial2 (pins 7/8), found on the real remote; the old sketch's Serial1 was never connected to it. Sim: RF24 shim supports ack payloads, API version 8 (hxsim_get_ack_payload); sim_smoke checks telemetry and every CAL command. Unity CmdPacket mirror updated. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
1 parent
481610c9fd
commit
0b836af8de
40 files changed
+1463
-281
No files matched your search
@@ -11,7 +11,10 @@ static RF24 radio(RADIO_CE_PIN, RADIO_CSN_PIN);
|
||||
bool RadioLink::begin() {
|
||||
present_ = radio.begin();
|
||||
if (present_) {
|
||||
radio.setPayloadSize(HXP_RADIO_PAYLOAD); // must match the robot exactly (static payloads)
|
||||
// The robot answers with Telemetry in its ack payloads, which needs
|
||||
// dynamic payload lengths on both radios. Each end checks the length of
|
||||
// what it receives against its own struct instead (see HexapodProtocol.h).
|
||||
radio.enableAckPayload();
|
||||
radio.setPALevel((rf24_pa_dbm_e)HXP_RADIO_PA_LEVEL);
|
||||
radio.setDataRate((rf24_datarate_e)HXP_RADIO_DATA_RATE);
|
||||
radio.setChannel(HXP_RADIO_CHANNEL);
|
||||
@@ -30,6 +33,18 @@ bool RadioLink::send(const CmdPacket& p) {
|
||||
last_ack_ms_ = millis();
|
||||
ever_acked_ = true;
|
||||
}
|
||||
// An ack payload lands in the RX FIFO. Drain it every time, so it can't fill up.
|
||||
while (radio.available()) {
|
||||
uint8_t len = radio.getDynamicPayloadSize();
|
||||
if (len == sizeof(Telemetry)) {
|
||||
radio.read(&telemetry_, sizeof(telemetry_));
|
||||
has_telemetry_ = true;
|
||||
telemetry_ms_ = millis();
|
||||
} else if (len > 0) { // 0 = corrupt length; RF24 has flushed the FIFO already
|
||||
uint8_t junk[32]; // another protocol version: ignore it
|
||||
radio.read(junk, len <= sizeof(junk) ? len : sizeof(junk));
|
||||
}
|
||||
}
|
||||
return acked;
|
||||
}
|
||||
|
||||
|
||||
Reference in new issue
Block a user