2026 remote: tabbed Nextion UI, robot telemetry, servo centre calibration
Protocol v4: CmdPacket grows to 26 bytes (cal_cmd, cal_servo, cal_value); new 30-byte Telemetry rides back on the nRF24 ack payload (robot state, IMU, battery, 18 joint angles, packets/s, servo-cal echo). Each end drops wrong-length packets, so version mismatches still fail closed. Robot (owner-approved): SERVO_CAL state while disarmed, per-servo centre trims (+-200 us) in EEPROM, telemetry, battery reading; the IMU estimate now always runs (leveling still gated by ROBOT GYRO). Remote: generated HMI (scripts/make_remote_hmi.py) with pages splash, drive, status, servos, cal, setup, upload; page-aware NextionUI that only writes the showing page and only what changed; servo calibration and UPDATE DISPLAY on the touchscreen and serial console; battery module. The display is on Serial2 (pins 7/8), found on the real remote; the old sketch's Serial1 was never connected to it. Sim: RF24 shim supports ack payloads, API version 8 (hxsim_get_ack_payload); sim_smoke checks telemetry and every CAL command. Unity CmdPacket mirror updated. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
1 parent
481610c9fd
commit
0b836af8de
40 files changed
+1463
-281
No files matched your search
@@ -7,17 +7,21 @@
|
||||
// Nextion -> remote: custom frames the HMI's touch events send with printh:
|
||||
// '#' <len> <cmd> [value] e.g. printh 23 01 41 (ToggleArm)
|
||||
// printh 23 02 56 + prints hSpeed.val,1
|
||||
// Command bytes are listed in NEXTION.md and in NextionUI.cpp.
|
||||
// Native Nextion return frames (terminated FF FF FF) are also parsed: a
|
||||
// display reset (0x88 "ready") triggers a full redraw, and the old HMI's
|
||||
// upload button sends a standard touch event (0x65) that's recognized.
|
||||
// Command bytes are listed in NEXTION.md and in NextionUI.cpp. Every
|
||||
// page's Preinitialize event sends 'P' + its page id, so the remote always
|
||||
// knows which page is showing. Native Nextion return frames (terminated
|
||||
// FF FF FF) are parsed too: a display reset (0x88 "ready") triggers a
|
||||
// full redraw, and the reply to `sendme` (0x66 page) gives the page after
|
||||
// the remote itself restarted.
|
||||
//
|
||||
// remote -> Nextion: plain instructions ("bArm.txt=\"ARMED\"" + FF FF FF).
|
||||
//
|
||||
// The remote is authoritative: buttons are plain buttons (not dual-state),
|
||||
// they only send requests, and render() repaints whatever the remote state
|
||||
// actually is. A Nextion reboot or a dropped byte self-heals on the next
|
||||
// periodic full refresh.
|
||||
// Only the page that is showing is written (by local component names), and
|
||||
// only what changed: every instruction is hashed into a per-page cache. The
|
||||
// remote is authoritative: buttons are plain buttons, they only send
|
||||
// requests, and render() repaints whatever the remote state actually is. A
|
||||
// Nextion reboot or a dropped byte self-heals on the next periodic full
|
||||
// refresh.
|
||||
class NextionUI {
|
||||
public:
|
||||
void begin();
|
||||
@@ -35,14 +39,29 @@ private:
|
||||
uint8_t native_buf_[8];
|
||||
uint8_t native_len_ = 0, ff_run_ = 0;
|
||||
|
||||
UiView shown_;
|
||||
uint8_t page_ = PAGE_UNKNOWN;
|
||||
bool force_full_ = true;
|
||||
uint32_t last_full_ms_ = 0;
|
||||
uint32_t last_link_ms_ = 0;
|
||||
uint32_t last_render_ms_ = 0;
|
||||
|
||||
// Change cache: one hash per instruction, in the order a page's render
|
||||
// issues them (the same every time).
|
||||
static constexpr int MAX_SLOTS = 96;
|
||||
uint32_t cache_[MAX_SLOTS] = {};
|
||||
uint8_t slot_ = 0;
|
||||
bool full_ = false;
|
||||
|
||||
void cmd(const char* fmt, ...);
|
||||
void pushState(const UiView& v, bool full);
|
||||
void pushLink(const UiView& v);
|
||||
void put(const char* fmt, ...); // like cmd(), but only if it changed
|
||||
void setPage(uint8_t page);
|
||||
|
||||
void renderTopBar(const UiView& v);
|
||||
void renderDrive(const UiView& v);
|
||||
void renderStatus(const UiView& v);
|
||||
void renderServos(const UiView& v);
|
||||
void renderCal(const UiView& v);
|
||||
void renderSetup(const UiView& v);
|
||||
|
||||
bool decodeCustom(UiEvent& out);
|
||||
bool decodeNative(UiEvent& out);
|
||||
};
|
||||
Reference in new issue
Block a user