2026 remote: tabbed Nextion UI, robot telemetry, servo centre calibration

Protocol v4: CmdPacket grows to 26 bytes (cal_cmd, cal_servo, cal_value);
new 30-byte Telemetry rides back on the nRF24 ack payload (robot state,
IMU, battery, 18 joint angles, packets/s, servo-cal echo). Each end drops
wrong-length packets, so version mismatches still fail closed.

Robot (owner-approved): SERVO_CAL state while disarmed, per-servo centre
trims (+-200 us) in EEPROM, telemetry, battery reading; the IMU estimate
now always runs (leveling still gated by ROBOT GYRO).

Remote: generated HMI (scripts/make_remote_hmi.py) with pages splash,
drive, status, servos, cal, setup, upload; page-aware NextionUI that only
writes the showing page and only what changed; servo calibration and
UPDATE DISPLAY on the touchscreen and serial console; battery module.
The display is on Serial2 (pins 7/8), found on the real remote; the old
sketch's Serial1 was never connected to it.

Sim: RF24 shim supports ack payloads, API version 8
(hxsim_get_ack_payload); sim_smoke checks telemetry and every CAL command.
Unity CmdPacket mirror updated.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
mangavalkandClaude Opus 5.5 committed 2026-11-17 14:42:37 +01:00
1 parent 481610c9fd
commit 0b836af8de
40 files changed
+1463 -281

No files matched your search

@@ -14,7 +14,10 @@ namespace HexapodSim
public short rx, ry, rz;
public short remote_roll, remote_pitch;
public short body_height; // -1000 lowest .. 0 default .. 1000 highest
public short cal_value; // servo centre calibration (remote only; 0 here)
public byte speed_scale, flags, seq;
public byte cal_cmd; // CAL_NONE (0): the sim's remote never calibrates servos
public byte cal_servo;
public const byte FLAG_ARMED = 1 << 0;
public const byte FLAG_STAND = 1 << 1;
@@ -73,7 +76,7 @@ namespace HexapodSim
// "Reload firmware" and the new code runs. Each load is a fresh power-on.
public sealed class HexapodSimNative : IDisposable
{
public const int ExpectedApiVersion = 7; // HXSIM_API_VERSION
public const int ExpectedApiVersion = 8; // HXSIM_API_VERSION
[UnmanagedFunctionPointer(CallingConvention.Cdecl)] delegate int IntFn();
[UnmanagedFunctionPointer(CallingConvention.Cdecl)] delegate void VoidFn();
@@ -88,6 +91,7 @@ namespace HexapodSim
[UnmanagedFunctionPointer(CallingConvention.Cdecl)] delegate void ServosFn(int[] us, int[] attached, uint[] writes);
[UnmanagedFunctionPointer(CallingConvention.Cdecl)] delegate void FloatsFn(float[] values);
[UnmanagedFunctionPointer(CallingConvention.Cdecl)] delegate void TwoFloatsFn(float a, float b);
[UnmanagedFunctionPointer(CallingConvention.Cdecl)] delegate int AckFn(byte[] bytes, int cap);
[UnmanagedFunctionPointer(CallingConvention.Cdecl)] delegate void BodyFn(float[] pos3, float[] quatWxyz4, out float yawDeg, out int contactMask);
IntPtr handle_;
@@ -107,6 +111,7 @@ namespace HexapodSim
StatusFn getStatus_;
TwoFloatsFn setGroundTilt_;
BodyFn getBody_;
AckFn getAckPayload_;
public string LoadedFrom { get; private set; }
@@ -146,6 +151,7 @@ namespace HexapodSim
n.getStatus_ = n.Fn<StatusFn>("hxsim_get_status");
n.setGroundTilt_ = n.Fn<TwoFloatsFn>("hxsim_set_ground_tilt");
n.getBody_ = n.Fn<BodyFn>("hxsim_get_body");
n.getAckPayload_ = n.Fn<AckFn>("hxsim_get_ack_payload");
int version = n.apiVersion_();
if (version != ExpectedApiVersion)
@@ -205,6 +211,10 @@ namespace HexapodSim
readonly float[] bodyPos_ = new float[3], bodyQuat_ = new float[4];
// Kinematic body from the DLL, robot-world frame. The rotation is a
// robot-frame quaternion held in a Unity Quaternion for its math only.
// The robot's telemetry (HexapodProtocol.h Telemetry, 30 bytes) from the
// last ack payload; returns its length, 0 before the first packet.
public int GetAckPayload(byte[] buf) => getAckPayload_(buf, buf.Length);
public void GetBody(out Vector3 posMm, out Quaternion rotRobot, out float yawDeg, out int contactMask)
{
getBody_(bodyPos_, bodyQuat_, out yawDeg, out contactMask);